0 Items - $0.00
Dremel Fiber disks HOME Works with dremel Razor saws ABOUT US Flush cut saws Drill bits - wire gauge TOOLS Miniature router bits Miniature cutters ATTACHMENTS & ACCESSORIES Cut off wheels Modelmaking HAND TOOLS Precision woodworking Dremel E-CATALOG Miniature woodworking tools Miniature circular saw blades NEWSLETTER Miniature accessories Miniature metal cutting saws CONTACT US
Precision woodworking
 
 
 




 

 
Accept Credit Cards
Attachments & Accessories HEADING_TITLE
Abrasives
Abrasives
These mounted abrasive accessories are used for sanding, polishing and clean-up on many surfaces. They come in an array of sizes and grits. They have 1/8" shanks and are designed to be used with Dremel type rotary tools.

Adaptor Chucks - Works with *Dremel®
Adaptor Chucks - Works with *Dremel®

Gyros Adaptor Chucks are made in the USA and constructed of durable Stainless Steel. They allow you to maximize the use of your small twist drills in any tool that can use 1/8" shank accessories. Easily switch between drilling and other uses for your motor tool without changing collets. Your drill can even be left pre-set in the chuck while your motor tool is being used with other accessories, thereby reducing setup time.  Use with your *Dremel® type tools. 

MADE IN THE USA.

 

 

*Dremel® is a registered trademark of the Robert Bosch Tool Corp.


Buff Wheels - Dremel® Type
Buff Wheels - Dremel® Type

Our mountable Miniature Buff Wheels are ideal for polishing metals and plastics.  They are designed to be used with *Dremel® type rotary tools.

 

 

*Dremel is a registered trademark of the Robert Bosch Tool Corp.


Cut Off Wheels - Fiberglass Reinforced - *Dremel® Type
Cut Off Wheels - Fiberglass Reinforced - *Dremel® Type

 

The Gyros Cut Off Wheels or Fiber Disks™ were designed to be used with *Dremel® type rotary tools - Our fiberglass reinforced cut-off wheels  have three exclusive formulations, which utilize cutting-edge abrasive technologies:

LT Formulation - For cutting Low Tensile-Strength materials like  Glass, Plastic, Stone, Ceramic, Wood, Aluminum, Copper, Brass.  Click Here.

HT Formulation - For cutting High Tensile-Strength materials like Hardened and Unhardened Steels, Steel Alloys, Hard Bronze.  Click Here.

ST Formulation - For cutting Super Tensile-Strength materials like Hard Ferrous & Non-Ferrous Metals, Stainless Steel, Titanium,  High Nickel Alloys and High Carbon/High Chrome materials.  Click Here..

Each cut-off wheel is engineered to be material specific. The abrasive used is perfectly matched to the material being cut. The fiberglass reinforced structure gives our cut-off wheels unsurpassed strength and flexibility, making them long lasting and resistant to breakage. Designed speciafically for use in all motorized rotating hand tools, our ultra sharp cut-off wheels optimize the low torque supplied by those tools found in just about every tool box. Will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut.  MADE IN THE USA.

For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

 

*Dremel® is a registered trademark of the Robert Bosch Tool Corp.


Cutter & Router Bits, *Dremel® Type
Cutter & Router Bits, *Dremel® Type

High Speed Cutters and Router Bits are used with Hand Held RotaryTools.  Cutters are used for shaping, hollowing, grooving, slotting, making tapered holes.  Router Bits are used for routing, inlaying, mortising in wood and other soft materials.  They put a decorative edge on wood and used for making miniature molding.  Use Router Bits with drill press or rotary tool with router attachment.

Our High Speed Steel Cutters are made using the combination of top quality high speed steel burrs to which a durable gold-colored Titanium Nitride (TiN) coating is applied.  Manufactured by a vaporized vacuum process at extreme heat, the gaseous titanium nitride adheres to the cutting surface.  Any material that is presently being cut successfully with uncoated high speed steel burs can now be cut far more efficiently, protecting and extending the life of the tool.  Ideal for soft metals, plastic and wood. 1/8" Shanks.  Works with Dremel.

Our Carbide Cutters last up to 20 times longer than steel cutters.  Ideal for hardened steel, cast iron, non-ferrous metals and other hard materials.  1/8" Shanks.  Works with Dremel.

Our High Speed Steel Router Bits are made using the combination of top quality high speed steel burrs to which a durable gold-colored Titanium Nitride (TiN) coating is applied.  Manufactured by a vaporized vacuum process at extreme heat, the gaseous titanium nitride adheres to the cutting surface.  Any material that is presently being cut successfully with uncoated high speed steel burrs can now be cut far more efficiently, protecting and extending the life of the tool.  Ideal for wood and other soft materials.  1/8" Shanks.  Works with Dremel.

All of our High Speed Cutters and Routers are available in single packs and in convenient sets.  All singles are carded and all sets are packaged in handy compact containers, perfect for tool storage.

 

 

*Dremel® is a registered trademark of the Robert Bosch Tool Corp.


Drill Bits - Wire Gauge
Drill Bits - Wire Gauge

Gyros' high quality Carbon and High Speed Steel Twist Drills are sharp and precision made for use in wood, plastic and metal.  They are accurately numbered and come in wirhandy storage casese gauge sizes #50 to #80.  Available on cards of two, clear vials of 12 and two 20 Piece drill sets in . 

Use with our Gyros Adaptor Chucks, for exceptional precision for use with your rotary tools that accept 1/8" shank accessories. 


Mandrels
Mandrels

Our mandrels are manufactured of high quality materials.  They are used to mount accessories like our Miniature Circular Saw Blades, Fiberglass Reinforced Cut-Off Wheels, etc.,  onto Rotary Hand Tools, like the Gyros PowerPro Rotary Tools and Dremel.  They are all 1/8" shanks.


Miniature Circular Saw Blades - Works with *Dremel®
Miniature Circular Saw Blades - Works with *Dremel®

Our Miniature Circular Saw Blades are manufactured to the highest industry standards. Being the only domestic manufacturer of high quality miniature circular saws, we take pride in supplying these precision-made tools. These ultra-sharp saws cut efficiently, optimizing the low torque supplied by popular brand motor tools available everywhere such as Dremel®, Craftsman®, Black & Decker® and most recently, Gyros' own line of the PowerPro rotary tools. Our saws enhance these tools and create in them a whole new level of functionality.

The saw blades are made of durable spring steel and are .015" thick. They are Hollow Ground, which means that each saw blade is designed to be thinner toward the inner center of the blade, which allows for the saw blade to more easily enter into the material being cut and not allowing for any binding to occur. They are ideal woodworking tools for limitless wood cutting projects, are compatible with other Dremel® tool accessories and they produce a clean finished cut - virtually eliminating any further finishing operations. Coupled together with our other Gyros hand tools, this makes them the ideal accessories for all your precision cutting projects. Gyros saw blades are universally used by craftsmen, handymen, precision woodworkers, hobbyists, model makers, do-it-yourselfers, home renovators, auto detailers, lab technicians and all those demanding the highest quality from their tools.

For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

 

 

 

*Dremel® is a registered trademark of the Robert Bosch Tool Corp.


Safety Shields - For Rotary Tools
Safety Shields - For Rotary Tools

Our exclusive GyrosGuard, uniquely designed to enhance the safe use of all types of cutting accessories used on High Speed Dremel® type Rotary Tools, is now available in two different kits. Each kit couples the GyrosGuard Safety Shield with a selection of our most popular Saw Blades, Fiber Disks, and appropriate Mandrels. The crystal-clear, heavy-duty, GyrosGuard is lightweight, shatter-resistant and spring loaded.  The two size Guards offer diameter capacities of 0" to 1-1/2" for the small size and 0" to 2-1/2" for the large Guard. Each GyrosGuard fits directly onto most Dremel® type hand held Rotary Tools.  The GyrosGuard kits thus are an essential component for every tool box, assuring the user of highest quality miniature cutting acessories, while providing the best protection available in the market.

For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

 

*Dremel is a registered trademark of the Robert Bosch Tool Corp.


Wire Wheels & Cups - Mounted - *Dremel® Type
Wire Wheels & Cups - Mounted - *Dremel® Type

These *Dremel® Type Mounted Wire Wheels and Wire Cups are available in Steel or Brass, with 1/8" shanks. They are used for general deburring and clean-up to remove rust and corrosion. Also polishes metal surfaces, blends surface junctures and clean electrical components. 

 

 

*Dremel® is a registered trademark of the Robert Bosch Tool Corp.


Continue
 
 
Modelmaking  
Works with dremel
© 2012 Gyros Precision Tools. All Rights Reserved.
Shipping And Returns | Privacy Policy | Site Map
Website Developed by Radial Web
 
Facebook Twitter YouTube